Hi-fi subwoofer for home use

However, the design emphasis was more on clean than on deep bass reproduction That makes this subwoofer more suitable for high-end audio application than for home cinema.

Picture left:
frequency response
at 50, 100
and 150 Hz
cut-off frequency
 
 

Due to the lack of extreme low bass, this subwoofer produces an extremely clean sound in living rooms. If more bass is required, low bass may be boosted by adjusting the subwoofer module to +3 or +6 dB.

Otherwise there are more adjustments possible using the passive radiator:
When more bass is required, weights are taken of the passive radiator or removed totally (factory setting). When a tighter bass is required weights have to be added to the passive radiator.

The kit contains:
- BassExciter BX 10, the powerful 10 inch driver
- BassExciter BXP 10 passive radiator
- Detonation DT 150, an amplifier with 150 Watt continuous
- Screws
- Cable
- Building instruction

BEC Kit price without cabinet: EUR 382,00
... without cabinet and without amplifier: EUR 189,00
Cabinet price G-BEC in beech wood multiplex: - not available

The cabinet consists of 8 panels. For
the driver a cut-out of 229 mm diameter
is required, for the passive radiator a
cut-out of 223 mm. The 150 Watt
(continuous) Detonation DT 150
module is going to be mounted on the rear
side of the cabinet. There are many
different ways to connect the module.

Home