TML speaker Kent with Morel drivers

Kent MK2, with Morel Drivers Building Instruction

Technical data
- efficiency: 87 dB (2.83V,1m)
- size (HxWxD): 93 x 16.4 x 21 cm
- speaker type: transmission line

Kent was originally developed by Klang+Ton in 1993 (magazine issue 5). This is a new edition by Morel Europa.

The kit contains per speaker:

- 1x Morel MDT29 Tweeter
- 1x Morel MW113 midrange / bass driver
- 1x nap foam N20, we achieved
the best results with it.
- 2 binding posts
- 2.5 m cable 2x1.5mm2
- 8 x Pan screws 3.5x17 black

The crossover components to be mounted on wood:
- 1.5 mH air core coil 1 mm
- 0.15 mH air core coil 0.71 mm
- 0.33 mH air core coil 0.71 mm
- 10 uF Mundorf MCAP capacitor/400V
- 6.8 uF ELCO non-etched
- 2.2 Ohm MOX4 resistor (red-red-gold)
- 3.3 Ohm MOX10 resistor (orange-orange-gold)
- 3.9 Ohm MOX10 resistor (orange-white-gold)

Kent MK2 kit without cabinet, price per speaker - not available

Kit variation:

- 1x Morel MDT38 tweeter instead of Morel MDT29
- 8.2 uF Mundorf MCAP capacitor instead of 10 uF
- 3.3 Ohm metal-oxide resistor MOX10 instead of 3.9 Ohm
- Price upon request

Kent MK2 kit with MDT 38 without cabinet, price per speaker - not available

Upon request a 150 x 115 mm universal PCB is available for mounting the crossover components.
Price per PCB EUR 4,70

Here the drawing as PDF file in Dutch

Kent MK2 Building Instruction Morel Kits Overview Home