Trimon II Monacor PA Speaker taken from K+T 5/2004 and 4/2005

Technical data:
- impedance: 4 Ohm
- rated SPL: 100 dB
- frequency response (-8dB): 55-18 000 Hz
- cross over frequency: 2000 Hz
- size (HxWxD): 104 x 39 x 45 cm
- cabinet type: bass reflex
Trimon aus K+T 5/2004 This kit, designed by Klang + Ton (Heinz Schmitt and Udo Wohlgemuth), is a two way bass reflex speaker with Monacor drivers. For high frequencies the MRH-200 horn with MRD-180 driver was chosen. Bass is supplied by two SPA-30PA, since the SP-12A/300PA is no longer available (one coil had to be changed). The result is a PA speaker with hi-fi qualities. .
 
The kit consists of:
  drivers by Monacor:
- high frequency horn MRH-200
- with driver MRD-180
- 2 bass drivers SPA-30PA.
- a Speakon NL4-MPR terminal
- 1/2 sealing tape
- 1 mat nap foam N25
  (for the rear wall)
- 16 Allen screws 5x30 mm
- 12 PAN screws 3.5 x 17 mm
- 3 metre cable 2x2.5 mm2
- building instruction
  for the crossover,
  components to be mounted on wood:
- 1.2 mH I-Point coil
  0.82 mH air core coil, 2.00 mm
- 0.47 mH air core coil, 1.0 mm
- 22 uF capacitor MKT
- 4.7 uF capacitor MKP
- 10 uF capacitor MKP
- 5.6 uF capacitor MKP
  (for high frequency boost)
- 3.3 Ohm (2x 6.8 Ohm
  20W, in parallel)
- 8.2 Ohm / 20 Watt

Price per speaker without cabinet and wood:   EUR 437,00

Please note: upon request we supply two gold plated brass binding posts instead of Speakon terminal without additional charge.

Home   K+T Workshop Overview